LEDs in Trains! Accucraft with LED installed Read an article about installing LEDs in Model Trains

Warm white LEDs installed in 2 locomotives, a single Cool white LED lights the news stand

Polar Express

Thank you for making it so easy to add LED lights to my War of the Worlds Martian War Machine. I added (8) - 3mm 5-13 Volt DC Green LED Lights. (1) 3mm 5-13 Volt DC Red Normal Flash Rate LED. (1) 9 Volt battery strap w/switch. This model turned out awsome!
===thanks to Anton Cacciamani for the Great pictures!

O scale trains on a busy layout. Our red and green 3mm LEDs mark the signals

thanks to Gayle of petworthminiatures for this great picture of our LEDs! In this picture of a 1/4 scale castle, a warm white lights the back hall while a torch (made from an orange solid and an orange flashing 1.8mm) lights the side hall. The main hall has a 3mm warm white and a 3mm fire kit in the fireplace.

Robot before and after 1.8mm LEDs installed

A red LED makes a great lantern for the signal man on this O scale layout

Williams by Bachman Sharks running at 11 volts, before and after the 3mm LED upgrade

LED Helicopter Lights. This great Photo of a Life Flight Landing to make a rescue in a Busy G scale Model Train Layout was sent to us by Bob Dickey, owner of the "Dewey, Cheatum and Howe RR" from Sherwood Oregon. Bob installs our LEDs in RC Helicopters!

Mars light, this train has two white slow flash installed for a Mars Light

LED Sheriff Car and light ambulance at an accident scene, 1:43 scale, sent by Paul, taken on his Terrific O Scale Layout

Here are a couple of RC Helicopter photos (red civilian helicopter and tan Marine Helicopter). They show the 3 strobes, 2 navagation lights, landing light and a taxi flashing red on the belly of the military (tan) helicopter

LED Runway, Another View

Great Diecast with our 3mm cool white installed for headlights

Germantown Challenger pass all lit with Evan Designs LEDs

Airport runway with our LEDs lighting the way

LEDs for miniatures! Cool White in a Theater Light

A 1:144 diner! Lit up with 1.8mm LEDs in Cool white

LEDs lighting the upstairs rooms

1.8mm warm white LEDs in a Bakery, a 1:144 project

Miniature torches, lit with LEDs. For these Tess used a flashing yellow and a flashing orange, both 1.8mm flashers

Water tower with our Warning Flasher installed.
Thank you to Doug Ross, professional photographer for this great picture!

Fireplace room in 1:144 scale, thanks to Gerry's Photo Album for this great picture

Lionel line lit by our LEDs. J&J Trains, a national certified Lionel, MTH, Williams repair service, has been installing our long-lasting LEDs in hundreds of trains, vehicles, and everything else for over three years now! Read and Article by Jerry

another great example of using our Mini Lighting Packet thanks Glynne for this great picture of your completed project!

I sent you these pictures of my MTH GP30 that I converted to your LED's and added ditch lights. I also modified it with Atlas GP35 pilots." == Stan Richardson

Stan used our Universal LEDs for this great modification!

"It’s just a simple 6x3x2 Project box with 4 momentary (on-off-on) switches hooked up to a Lionel O gage setup to replace the older big style remote momentary’s to control the switching of the remote track switches. These are the 1st 4 switches from left to right. Those have the 3 prong red/green LEDs hooked up to them. The remaining 2 switches I have hooked up are for accessory power to control accessory lights for structure lighting, street lights, etc. I have the 2 prong Blue LEDS you sent me hooked up to them. So pretty simple setup, nothing elaborate, but your LEDs are great. I will be recommending your site to all I know that need them. The pictures show when the remote switches are in the Green position they are for the straight and red for switching to a different track. The Blue just means the power is on." Chris

I added Evans designs Flashing Leds to Make my EOT's Operate on my MHC's!