Limited Edition 1/43rd scale Ertl 1930 Chevy Delivery truck with Campbell's logo on the door.
Chevrolet Tahoe police car
1/24 scale Chevy Tahoe in PGPD K9 design.
Ford F-150 Raptor SVT
Latest custom build. 1/10 scale Ford Raptor SVT truck body done up as a Mega-City One Justice Department patrol vehicle from the Judge Dredd comic series. I added all the lighting and siren. All LEDs are mounted behind the body to prevent holes and LEDs sticking out. I upgraded the wheels too. Video ain't the best, but it gives you an idea how it looks lit up.
Details of police cars
Those are your LEDs, so figured I'd share the finished product with you. Couldn't have done this without you! Thanks!! TJ
VW Beetle oldtimer
An older 1/12th scale diecast 1967 VW Beetle lighted with Evan Designs LEDs.
Tiger on a truck
Today I rolled out the trailer and drilled for the tiger eyes. Take a look.
You were just what I was looking for.
Thanks again for a super product and great shipping.
I'm very pleased with the results!
Patrol car Crown Victoria
1/18 Crown Vic with all of the LEDs purchased from Evan Designs
It's my passion to build these models & stay as true to the actual patrol car as possible and thanks to you guys I get an awesome deal on the LED's and stuff so thank you :-)
Truck in motion
Back of the red and grey truck with lights
Red truck of New Zealand and Australia
I have attached a couple of pic's of my ' Trucks of new Zealand & Australia ' All the trucks are hand crafted from timber & not from model Kits
They all done off photos & knowledge
Pink Pig Porsche
Pink Pig Porsche 917/20
El Camino classic car
This is the 67 ElCamino that Mother's Car Polish owns.
Gorgeous light Ford Pickup
A 1937 Ford Pickup in the odd 1/36 scale. A challenge due to the suspended head and tail light housings. Nano Chip LEDs from Evan Design did the trick, along with some creative measures during installation!
Dairy food in a vehicle
Yellow and green vehicle that transorts dairy products door-to-door, with LEDs
Farm tractors in garage
The inside of one of my 1/64th scale Farm machine sheds, with the nano warm white chips. People that i show this picture to think it looks so real...and it DOES!!!
Tractors on a building site
Building made with Model Builder spotlights are 3mm. warm white(shining on the tractors) This is a model of Kleine Equipment outside of Galesburg Illinois along highway 74. This dispaly was shown at the 2009 National Farm Toy Show in Dyersville Iowa.
NYC Checker Cab
1/43rd scale NYC Checker Cab. 1/8-mm Evan Designs LED's for head lights and tail lights...2 3-mm LED's in roof-top sign and 4 SMD Chip LED's for side markers.
Smart for two
Smallest diecast I have lighted with Evan Designs LED's...so far. The New Ray 1:43 scale Smart Car for Two. Nano Chips used front and back. A VERY tight fit for the associated wires!
Corgi fire truck
Corgi 1/50th diecast fire truck with Evan Design LEDs added...this was my very first
Mazda Miata model
1/24th Mazda Miata with many hours work to get the end result. All Evan Design LED's. I LOVE these things!
Police makes an arrest
Sheriff's deputies take down a felon in the local mobile home park. Vehicle is a Road Champs Lake County Indiana Sheriff's car
Yellow Chevy Impala
1958 Chevy Impala with wig wag and LEDs
Ford Pick-up police car
Here is my latest addition. Its a 1929 Ford Pick-up that I modified into a police vehicle. Its 1/18 scale like the rest. Too much work in this one to replicate, but glad I did it. LOVE this one!! -TJ
White Dodge Challenger police car
Dodge Challenger unmarked car with 40 LEDs
Dark blue Crown Victoria
Undercover Crown Victoria in Dark Blue. The headlights are wig-wag and it has a siren.
King Hauler truck
1/14 scale Tamiya King Hauler, added 42 LED marker lights to trailer
Massachusetts Environmental Police in nature
Replica of the Massachusetts Environmental Police truck
Massachusetts Environmental Police
This is what i did with the lights purchased from your site. It Is a rc replica of a Mass environmental police truck.. lights and siren controlled by radio system. . Thank You
Blue police car
A 1:43 police car. We made the lightbar by drilling a small hole into the metal below each position in the bar. Then pushing up a 1.8mm LED. Same with the headlights and tail lights. Remove the lenses first. The siren was a tight fit, we have the speaker in the back seat, the battery under the stand. Very fun project!
Muscle Machine model
Muscle Machine 1/18 scale 50's era Mercury with a custom flame paint job. I added a TON of LEDs to give the car the look is its running on "Hell Fire"!! This a teaser... Finished car vid will follow.
Inside and out police car
Four pictures of police car inside and out with LEDs
G.I. joe jet
"Just thought I'd share some of my latest projects with you. I put an arctic spin on the HALO Warthog and wired up a huge g.i. joe jet. Just placed another order. Keep on making these great products!
Batman Forever Batmobile
"I got the Leds! Thank you so much!"
Tank by the fence
"Here is the latest vehicle I made over the weekend.
Thanks a lot"
Inside of a Batmobile
"Thanks again, for making such quality products, they really bring my collection to life!"
Three cars with lights
"As promised Wig wag added to Tamiya Subaru plus all 3 of my cars and siren set.
Next up fire engine may need more LEDS!" David
White and yellow Sedan
White and yellow Sedan classic car from 1955 with red lights
Sacramento PD car
"Just wanted to let you know I finally finished my second Sacramento car but with an added bonus with a live feed call with dispatch at the very end. Thanks again for your support and the proper tools to allow me to build such great pieces. :)"
Sacramento City Police car
"Just wanted to thank you again for your help with my previous oder of light set ups with the wig wag circuits and spool of wire. I just wanted to let you know that I have finished my project with the wig wags and came out great. First time I had actually used the wig wags and turned out great, I cant thank you enough... Here is the youtube link of teh video I shot. Thanks again for your continued support and look forward to more future business."
Miami Police car
"I just finished building the Miami Police car for a cop in Miami. I did a quick video of the car for the customer and wanted to attach it for you to see. I did everything on this car except make the decals, but I did install them. I swapped the grille & wheels and added a laptop to the interior for upgrades. The lights/siren are from your 'undercover Crown Vic' package. Try to ignore the background noise... I had music playing in the background and my parrot was making noise while recording. Anyway, thought you might be interested. As for the lights, shoot me an invoice and I'll get money to ya right away. Thanks again." -TJ
From classic to police cars
I shot a quick vid of 4 of my latest personal project cars. They are all 1/18 Muscle Machines I'm turning into police cars. I still have 2 other cars to do and will finish them tomorrow. The ones in the vid are a 69 Camaro Z28, 69 Charger, 57 Chevy, 55 Chevy Nomad (gonna be a K9 car). The last 2 are a 69 Chevelle, and a 66 GTO. Decals are on the way. Anyway, thought I'd share where your LEDs have ended up. Take care! " -TJ
In front of a police station
"Here's a pic of a couple of your LED lighted cars that I recently worked on. These have flashers, so I'm going to upload a short video clip on Vimeo.com, a file sharing website, and send a link so that you can see the flashers in action. I have more car pics and videos that I'll send, as I get them processed.
Dark police cars
"Here are my Model Police cars...
My buddy did the paint with a dupont automotive paint and clear at his shop in his paint booth and baked em.
Just wanted to say thanks"
John Deere 8630RT tractor
John Deere 8630RT Track tractor with a Kinze 1050 Grain Auger wagon. Using the LED "chip" lights warm white.