I give directions for making those ceiling lights. Love, love, love LEDs
Art studio dollhouse
I just finished my art studio using my own pictures that I painted oil and watercolor in 1/4 inch. I like it to light up and I think these are the larger light 5 mm and the ones in the back are 3 mm
Luxurious living room with a piano
left wall has 2 bulbs left back window has one as well (all three are above the windows)
the two holes in the top of the back fireplace each get one light
the dining room gets one above the table
the right wall gets two bulbs ...one on each side of the FP to show off the clear glass shelves
I used the 1.8mm warm whites for the dining room and living room and painted the bulbs outside of the windows (3) a light blue to give the snow scene outside a cool cast.
Luxurious living room
here is another view!
Inviting candy shop and bakery
This little bakery was built from scratch. It is 2 inches tall,2 5/5 inches wide and 2 inches deep. Lit with LEDs
Intimate and cozy
Each room is lit with a tiny LED light. The wires for the battery powered lights are glued down the back of the house, and aren't noticeable.
-The 3 volt watch battery case is underneath the base. There is a small on/off button on the base of the house.
Impressive hobbit house
hobbit house in a fairy garden.
Extravagant bakery scene
This Boulangerie project has been built into an 8" x 10"
memory box that is only a few inches deep.
The breads and the entryway are lighted with
Warm White 1.8mm LEDs.
Thanks to Artisan Moonyeen Moller for this great picture! Looks delicious!
Cozy living room
Quarter scale room box with 2 nano LED
Humble Thanksgiving Dinner
This is a scratch-built 1:144 room box, depicting a Thanksgiving Dinner. I used one of the warm white LED lights in it; battery is hidden in the base; switch is on the back.
Christmas in a Christmas bauble
I make my wife a Christmas bauble each year and normally just drill a hole into the bauble to insert a light from the christmas tree to illuminate it. This was the first year that I have decided to try your LED sets and was delighted with the effect. As a result, I want to change ALL the baubles to LEDs!
A yellow LED for the beer sign back-lighting and a flickering orange for the stove in the kitchen in back.
Orange kitchen stove
the stove in the kitchen has the orange flicker LED
1/48 Farmhouse complete with furniture and lights. I used 4 LED's and 1 chip light I placed in a floor lamp on the second floor. I also used the 3 volt battery pack. It was very easy to use.
In this christmas scene we have a chip as backlighting, an orange flicker in the fireplace and a nano chip warm white in the lamp.
I put all three on a coin cell system.
Mice family in a ball of leaves
This is a gourd depicting a little woodland mouse house - a ball of leaves. Dad is the look-out while mom reads a story to the kids. Her candle is lit with one of your wonderful leds.
Witches by the campfire
Here are the Campfire Girls. I just order more 1.8mm 3 volt Fire kits to make another scene like this one. Moonyeen Moller made this roaring campfire. I made the 1/12 witch dolls.
Tales in a lantern up-close look
This is the interior of the project photographed with the front cover removed. Thank you to: Betty Dewitt for these GREAT pictures!
this project uses our Chip LEDs to light this great project!
Tales in a lantern
The project started with a damaged lantern purchased from a discount store.
I discarded the center portion, lined the dome with gold metallic vellum and added
a finial to the top. Finished project photographed without additional lighting. I used LEDs shining through filigree medallions to create what I think are interesting shadows.
Baby green Beaumont Mansion
1/144th Scale Beaumont Mansion
The chip lights make this entire house come to life. Notice the warm glow coming from the windows behind the porch. This picture was taken during the day with no flash.
Open House at the Beaumont Victorian Mansion - by appointment only.
I used 1 warm LED light for the kitchen, and 5 warm chip lights for the remaining rooms.
Thank you for this wonderful lighting. It makes the dollhouse become a home!
Details make perfection
Can't thank you enough for your patience with me and the help you gave me. Nervous as I was, the lighting was just as simple as you promised it would be and I will never be afraid of it again! I will use your LEDs from now on, next project is to make 12th scale lamps that will hold them! Attached is the pic of my finished room box. The LEDs are so much brighter than the 12 volt [incandescent]! I will definitely be buying again :D
A room with a view
I'm very excited about the roombox! The lights worked great! It is definitely being offered as the QC workshop in April and in Columbia, SC sometime this summer with a group there. The lid is slightly raised in the first photo to show all the way to the ceiling. The second in a close up so you can see both the lamp and the outdoor lighting.
Peggy in SC
Magnificent Georgian mansion
Georgian Mansion with warm white 1.8mm LEDs installed thanks to Pat Campbell for this great picture! Lovely Mansion!!
Warm place for family gatherings
Lovely living room with a 1.8mm warm white
Another great kitchen, thanks to Heather in UK for sharing!
Cozy kitchen and a dog
Lovely complete kitchen features our 1.8mm LED bringing a nice light to the scene
Beacon Hill style dollhouse
Spring has arrived at the 1/144th scale Beacon Hill residence. I used 9 chip lights, one for each room in the house. The battery case is under the house, with the on/off button hidden in the flower garden.
This 1/144th micro mini scale Victorian Dollhouse has Chip Lights in 6 rooms. The attic is the only room with out a light. Visit Normans Country Creek for more information about his tiny dollhouse.
Cape May Cottage front view
This is the front view for my 1/144th Cape May Cottage.
Wonderful Cape May Cottage
The Cape May Cottage is my first attempt with the 1/144th micro scale mini houses. I used Chip Lights for the 3 first floor rooms, and 1.8mm LED lights for the upper floor rooms. It sits on a 5" diameter turntable.
the flickering fireplace (I LOVE that kit of yours) Fran of Fran's Minis
Light the fireplace
"I thought I would attach a picture of your Fire leds in my fireplace. I used a DC wall wart."
Christmas is around the corner
Lovely night before Christmas baby house. Each building has it's own warm white chip LED.
Thank you to Phyllis King for this great picture!
Cardboard led installation
"...those 5mmn in this are bright... only took 3 to totally illuminated the 15" tall cathedral...
I'm in the process of making another... with a different color theme...
hope you approve of my super simple led installation... love that cardboard and white glue...
finally finished... and on its way to Wisconsin... well over 250+ pieces...i lost count about three quarters of the way finished..."
Howard Leroy Lamey
Graceful room box tower
A great 1/4 scale room box tower in an elegant stand, using our 1.8mm warm white LEDs, one per floor . Thanks to Cascade Miniatures for the lovely picture!
Simple room with a warm lighting
This lovely 1/4 scale lamp features our warm white Chip LED. The chip is only in the top but it gives such a nice amount of light it not only lights the whole lamp, it gives the whole room a nice warm glow.
Fairytales in a nutshell
This great 1/4 scale fairytale babyhouse treasure shows a different small scene in each room. Lit with our 1.8mm warm white LEDs
Penguins in the Christmas bauble
This year's Christmas bauble finally finished. Thanks to the size of the LEDs, I was able to fit lights in the smallest of spaces! As part of the diorama, I wanted the female penguin to be asleep in front of the telly while the male penguin was hard at work cooking in the kitchen (definitely NOT what happens in our house!)
The house with clocks
All of these projects are quarter scale. The house is all done in SMD Chip LEDS. This orignal kit WAS NOT a lighted house I did it on my
Relax by the pool
Great use of a 1.8mm blue LED makes this pool seem to have ripples and depth. Thanks Kathi for this great picture!